Ship from EU Super MB PRO M6+ PRO DoIP Benz Diagnostic Tool Full Configuration Without Software

Product Description

SUPER MB PRO M6+ PRO Full Version

Bundle Kit Sales (You can place an order according to your needs and budget):

SP586+SS470-AS Super MB PRO M6+ PRO with the latest SSD
SP586+SO652+SS470-AS+SS175 Super MB PRO M6+ PRO with SSD plus Lenovo T440 Ready to Use
SP586+SS470-AS+SO489+SS175 Super MB PRO M6+ PRO with SSD plus Lenovo X200 Ready to Use
SP586+SO666+SS470-MSATA Super MB M6+ PRO with SSD plus Panasonic FZ-G1 Ready to Use
SP586+SO666+SS398-MSATA+SS175 Super MB PRO M6+ PRO with Benz&BMW 2 in 1 SSD plus Panasonic FZ-G1 Ready to Use


Super MB Pro M6+ PRO Introduction:

Based on M6, Super MB PRO M6+ PRO has greatly improved functions and compatibility and is 100% compatible with the original Mercedes-Benz software.


What's New in Super MB Pro M6+ PRO ?

Supports for BMW F and G series coding.
Compatible with BMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, ODIS-e, XDelete, M Flasher, etc App.
Can be used as a DoIP device for VAG.

M6+ Pro, M6+ and M6 product function comparison chart
 

	M6 Product Functions	M6+ Product Functions	M6+ Pro Functions
XENTRY Car	√	√	√
XENTRY Truck	√	√	√
DTS	√	√	√
VIDEO	√	√	√
MB DOIP	√	√	√
MB WIFI	√	√	√
PC USB	×	√	√
PC RJ45	√	×	√
Vehicle Voltage Real-time Display	×	×	√
Other DOIP	×	√	√

Super MB Pro M6+ PRO Functions:
 
1. 100% compatible with the original Mercedes-Benz software.
2. The front label of the M6+ uses a design with trademark rights and art copyrights to improve product recognition.
3. The communication interface between the M6+ and the computer is a USB 3.0 interface, which improves the compatibility of the product with computers and tablets. (Compatible with both old and new computers and tablets, no need to choose old-fashioned computers and tablets with network ports.)
4. M6+ supports remote C-side operation. The client does not need to install special diagnostic testing software. Just connect the M6+ to a local computer that can access the Internet, and we can remotely provide customers with paid diagnosis and detection services for vehicle failure. Customers can also set up a local remote diagnostic test in the local area network. The above ways greatly improve product flexibility.
5. M6+ supports vehicles with DOIP communication protocol, such as the new Volkswagen, Audi, Skoda, Bentley, Lambo, etc. A dedicated transition button is provided.
8. Support new Model W223 C206 213 167 (if only the M6+ firmware without software, need to open this license separately)

For BMW cars testing support DOIP, the device Super mb pro m6+ needs to change to DOIP mode

after changing well, the communication light will flash slowly.
if not flash slowly, it does not switch well.

Note: For BMW only tests BMW F  I G chassis car, not support E chassis car.



M6+ Pro Connection Instructions




M6+ PRO Mercedes-Benz and BMW configuration
 
1. Plug the M6+PRO into the power supply or connect the OBD to the test vehicle, and plug in the USB/LAN cable of the M6+PRO.
 
2. Turn on the computer and plug in the computer USB/LAN cable.
 
3. Open the computer network configuration interface and find the Realtek USB FE Family Controller network/the network adapter that comes with the PC.


4. Click “Properties”--TCP/IPV4, and set the IP address as shown in the figure below.



5. Click “Advanced”, and add a group of network IP addresses as shown in the figure below.



6. Click “OK”. After the configuration is successful, the display is as follows.



7.For the same computer, if you replace a new M6+PRO, you need to reset the IP address. After the setting is completed, the computer is successfully bound to the M6+PRO and there is no need to set the IP address again for wired and wireless Internet access. (Use LAN port connection mode, no need to re-set IP when changing devices).
 
8.You can test Mercedes-Benz normally. Please connect the diagnostic cable with SUPER MB PRO logo.



9. BMW wireless BMWAiCode configuration(only for F+G chassis)
Connect to the M6+PRO -***, password：123456789, wirelessly, press and hold the M6+PRO switch button for 3 seconds, and the M6+PRO host wireless indicator will flash. The computer-side BMWAiCoder configuration is as follows:



10. BMW wired BMWAiCode configuration(only for F+G chassis)
Connect the USB/LAN cable, press and hold the M6+PRO switch button for 3S, and the M6+PRO host wired indicator light will flash. The computer-side BMWAiCoder configuration is as follows:




Supported BMW models and years.
 

Model Year	2019	2018	2017	2016	2015	2014	2013	2012	2011	2010	2009
X1	√	√	√	√
X3	√	√	√	√	√	√	√	×
X4	√	√	√	√	√	√
X5	√	√	√	√	√	√	×
X6	√	√	√	√	√	×
1 Series	√	√	√	√	√	√	√	√	×
2 Series	√	√	√	√	√	√	√	√
3 Series	√	√	√	√	√	√	√	×
4 Series	√	√	√	√	√	√	√
5 Series	√	√	√	√	√	√	√	√	√	√	×
6 Series	√	√	√	√	√	√	√	√	×
7 Series	√	√	√	√	√	√	√	√	√	√	√

 
SUPER MB PRO M6+ Package List:

1pc x SUPER MB PRO M6+ Pro Host
1pc x OBD2 16pin Cable 
1pc x USB Cable
1pc x 38P Adapter
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
1pc x manual
   

---

Contact Us:

Email: Sales@OBDStore.eu

WhatsApp : +86 133 7268 9373

Shipping Policy

1. Czech and UK Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
EU Check: Ship from Czech
UK Check: Ship from UK
2. DHL Shipping: Suitable for customers worldwide. Will take 3-5 working days.
3. Yanwen Express: TAX Free for European Countries. Will take 7-10 working days normally.

More shipping details check.